10
2020
-
06
A Brief Discussion on the Features of Lead Extraction Pumps
Author:
Due to the specialized maintenance required for lead tanks, as well as frequent leaks and emergency rescues, lead plating manufacturers must drain all the molten lead. Typically, this process is done manually by pouring the lead directly from the lead pot, which demands significant physical effort and results in extremely high labor intensity—tasks that most people simply cannot endure. However, when KND series lead pumps are used to extract the zinc liquid, their minimum flow rate of 30 tons per hour allows for pumping 100 tons of lead in just 3 hours. Not only does this dramatically reduce the time needed, but it also significantly boosts production efficiency. Moreover, it frees workers from grueling manual labor, greatly easing their physical burden. Additionally, using these pumps eliminates the risks associated with high temperatures and prevents molten lead from splashing onto personnel, further enhancing safety and improving the overall lead-plating process.
Due to the special maintenance required for lead tanks, as well as lead tank leaks and emergency recovery efforts, lead-plating manufacturers must drain all the molten lead. Typically, pouring manually from the lead pot requires significant physical labor and involves high levels of exertion—tasks that most people simply cannot endure. If one were to use KND Series Lead pump Extract the zinc liquid, then Lead pump The minimum flow rate is 30 Ton / Hours, only required 3 It takes just one hour to pump. 100 Tons of lead. This not only significantly reduces the time but also boosts production efficiency. This also freed workers from grueling physical labor. The use of lead-pumping machines significantly reduced the intensity of their workload. At the same time, it eliminated the risks associated with high temperatures and prevented molten lead from splashing onto workers, ultimately boosting the economic efficiency of lead-plating manufacturers.
Draw Lead pump It primarily uses the centrifugal force generated by a high-speed rotating impeller to discharge the molten lead. Draw Lead pump The only difference from a conventional centrifugal pump lies in the working medium. KND Series draw Lead pump The main components, such as the impeller, casing, and sealing sleeve, are all made from zinc-resistant alloy steel imported from Germany, effectively controlling the pump’s flow rate, temperature drop, and thermal expansion coefficient. Indicators show that the pumping… Lead pump Meet the special requirements for long-term, repeated use. Lead pump Highly acclaimed and favored by the lead-plating team. Its specific characteristics are as follows:
1. Draw Lead pump Employing vertical long-axis rotation (typically exceeding 2 Millimeters) to keep the drive motor away from heat sources and ensure its long-term, reliable operation.
2. The lead liquid extraction pump body features an open-frame structure connected to the drive unit. When the lead liquid level is low, observe the adhesion between the pump shaft and the pump housing.
3. Draw Lead pump A handwheel is mounted on the pump shaft to prevent and detect whether the impeller and pump casing of the lead-pumping unit are being maintained at low temperatures by the variable-frequency fluid.
4. Draw Lead pump The impeller and pump casing are made from a special corrosion-resistant zinc alloy steel, featuring high-temperature resistance, excellent corrosion protection, and outstanding wear resistance, thereby extending the service life of the lead pumping unit.
5. Draw Lead pump Use a long-pitch, double-row self-aligning bearing to enhance the smooth operation of the lead extraction pump.
Lead pump
Previous page
Previous page
Related News
Henan Yuguang Metallurgical Machinery Manufacturing Co., Ltd
Phone:
Fax:
Address:
No. 888, West Section of North Ring Road, Kejing Town, Jiyuan City